0

FIN EC software

在线帮助

Tree
Settings
Program:
Language:

Load edit

The internal forces and check type for individual load case can be input in this window. The appropriate equations for verification are selected according to the specified check type. These options are available:

Wall vertically loaded

  • This verification style is suitable for the verification of whole structural member that is loaded mainly by vertical load. Verification is performed at underside of floor, at mid height and at top of floor (chapter 6.1.2. of EN 1996-1-1).

Wall vertically loaded - top

  • This verification style is suitable for the verification of structural member at underside of floor (chapter 6.1.2. of EN 1996-1-1). Member should be loaded mainly by vertical load. The eccentricity is calculated using equation (6.5).

Wall vertically loaded - centre

  • This verification style is suitable for the verification of structural member at mid height (chapter 6.1.2. of EN 1996-1-1). Member should be loaded mainly by vertical load. The eccentricity is calculated using equation (6.7).

Wall vertically loaded - bottom

  • This verification style is suitable for the verification of structural member at top of floor (chapter 6.1.2. of EN 1996-1-1). Member should be loaded mainly by vertical load. The eccentricity is calculated using equation (6.5).

Wall laterally loaded - bending about horizontal axis

  • This verification style is suitable for the verification of laterally loaded structural members (chapter 6.3.1 of EN 1996-1-1). The failure in plane parallel to bed joints is expected for this case (figure 3.1a in EN 1996-1-1). The flexural strength having a plane of failure parallel to the bedjoints fxk1 will be used in analysis.

Wall laterally loaded - bending about vertical axis

  • This verification style is suitable for the verification of laterally loaded structural members (chapter 6.3.1 of EN 1996-1-1). The failure in plane perpendicular to bed joints is expected for this case (figure 3.1b in EN 1996-1-1). The flexural strength having a plane of failure perpendicular to the bed joints fxk2 will be used in analysis.

All internal forces at underside of floor, at mid height and at top of floor can be input using load type "Wall vertically loaded". Some values can be calculated automatically using these rules:

  • normal forces at mid height of wall Nmd and at top of floor N2d are calculated as a sum of normal force at underside of floor N1d and self-weight of wall or column. Self-weight is calculated using cross-sectional area, material density (can be input in the window "Masonry" or using the input line "Bulk density" in this window) and partial load factor γG= 1,35.
  • shear forces at mid height of wall Vmdz and Vmdy and at top of floor V2dz and V2dy use the values of shear forces V1dz and V1dy that were specified at underside of floor.
  • Bending moments at mid height of wall Mmdz and Mmdy are automatically calculated using linear interpolation between bending moments at top of floor M2dz, M2dy and at underside of floor M1dz, M1dy.

Window "Load edit"

Try FIN EC software yourself. Download Free Demoversion.

更多免费培训资料

试用版

免费试用软件

视频教程

观看有关如何在实践中使用我们软件的简短视频。

工程手册

这些手册将引导您一步一步完成特定的设计任务。